Description
ACRD15 M16 Pocket Shim Kit
A two-piece shim set that centers the ACRD15 in an M16-cut lower. The M16 pocket is wider than an AR-15 cut, so the device has room to shift side to side. The shims take up that gap and hold it square.
What’s In The Kit
Two shims, two screws, and a 2mm hex wrench. Everything needed to install, nothing else to buy.
What You Need To Run It
An ACRD15 with the threaded pin. The screws thread into that pin — without it there’s nothing to fasten to, so check which pin your device has before ordering.
What It Does
Drops the side-to-side play out of an M16-cut pocket so the ACRD15 sits centered and stays there. Install takes a minute with the included wrench.
Specifications
| Kit contents | 2 shims, 2 screws, 2mm hex wrench |
|---|---|
| Requires | ACRD15 with threaded pin |
| Fits | M16-cut lower pocket |
| Tools needed | None beyond the included wrench |
Legal Responsibility
It is the buyer’s responsibility to verify that this component is legal to own and use in their jurisdiction. This product is sold as an individual mechanical component for lawful use in appropriately configured firearms. VoidSpec does not provide legal advice. If there is any doubt about whether this part is appropriate for your situation, consult a firearms attorney in your state before purchasing.
